Products
-
pump and compressor high low pressure switch
The pressure switch adopts stainless steel action diaphragm and is manufactured by mature technology. It has the advantages of fully enclosed, high precision, no drift, small size, vibration resistance, long durability, reliable performance, and convenient installation.It can automatically measure and control the pressure in the system, prevent the pressure in the system from being too high or too low, and output switch signals to ensure that the equipment works within a safe pressure range.
-
Universal Pressure Switch
This is a universal pressure switch, the appearance can be designed according to the specific requirements of customers, and it has a wide range of applications.Such as air suspension systems, water treatment, air compressors, mechanical hydraulic and oil pressure control systems, agricultural machinery, construction machinery, CNC machine tools and machining center lubrication systems, safety devices, air-conditioning, refrigeration equipment, vacuum generators, vacuum tanks , Electric vehicle brake booster system, etc.
-
wring sealed pressure switch used for air train horn
The mechanical pressure switch is a micro switch action caused by pure mechanical deformation.When the pressure increases, the different sensing pressure components (diaphragm, bellows, piston) will deform and move upward. The upper micro switch is activated by a mechanical structure such as a railing spring to output an electrical signal. This is the principle of the pressure switch.
-
air pressure switch rated 105-135-90-120-150-180-160-200psi
This is a pressure switch with a pagoda-shaped joint, and its joint is in a continuous cone shape.So it can better connect with water pipes and air pipes,
This pressure switch is mostly used in small air compressors, small air pumps, and water pumps.Air pipe or water pipe can be installed at its interface, In addition, the inserting part can be connected by soldering wires, and the specified terminal connector can be installed.Of course, if you have high waterproof requirements, you can also add our unique waterproof case, as shown in the figure below
-
adjustable vacuum air and water pressure switch
1. Product Name: Water Pressure Switch, Air Pressure Switch, Micro Pressure Switch, Vacuum Switch
2.Electrical parameters: 16 (4) A 250VAC T125 16A 25A 250VAC
3. Applicable medium: steam, air, water, liquid, engine oil, lubricating oil, etc
4.The highest pressure: positive pressure: 1.5MPA; Negative pressure: -101kpa
5. Working temperature: -35℃~160℃ (no frosting)
6. Interface size: conventional G1/8, according to customer requirements
7.Control mode: open and close mode
8. Product material: copper base + plastic shell, or copper base + aluminum shell
9. Mechanical life: 300,000 times
10.Electrical life: 6A 250VAC 100,000 times; 0~16A 250VAC 50,000 times; 16~25A 250VAC 10,000 times
-
vacuum adjustable low and high pressure switch
1.Electrical parameters: 0.2A 24V DC T150; 0.5A 1A 2.5A 250VAC
2.Operating temperature: -40℃~ 120℃（No frost ）
3.Connection size: The normal size is 1/8 or 1/4. Can be customized according to customer requirements
4.lifetime: 1 million times
5.Electrical life : 0.2A 24V DC 1 million times; 0.5A 12V DC 500,000 times; 1A 125V/250VAC 300,000 times
-
Single-Pole Single-Throw Automatic Reset Pressure Controller
This series of pressure controllers mainly use the built-in stainless steel reversible action diaphragm to work in the opposite direction after sensing a certain pressure.When the diaphragm moves, a guide rod will drive the electrical contacts to close or open. When the induced pressure drops below the recovery value, the switch can automatically reset.
-
Yk Air conditioning refrigeration pressure switch
YK series pressure switch (also known as pressure controller) is developed by using special materials, special craftsmanship and learning from the technical advantages of similar products at home and abroad. It is a relatively advanced micro switch in the world.This product has reliable performance and easy installation and use. It is used in heat pumps, oil pumps, air pumps, air-conditioning refrigeration units and other equipment that needs to adjust the pressure of the medium by itself to protect the pressure system.
-
Pressure Switch For Air Conditioning Refrigeration System
When the pressure in the system is higher or lower than the safe pressure, the pressure sensor in the controller will act immediately to make the contacts in the controller turn on or off, and the equipment will stop working at this time;When the pressure in the system returns to the safe pressure range of the equipment, the pressure sensor in the controller is reset immediately, so that the contacts in the controller are turned on or off, and the equipment is working normally at this time.Mainly used in air conditioning and refrigeration systems, vacuum pressure control systems, water pressure control systems, steam pressure control systems, oil and gas pressure control systems, etc., to prevent the pressure in the system from being too high or too low to ensure that the system is always within a safe working pressure range.
-
Pressure Switch With Pressure Range Of – 100Kpa ~ 10Mpa
It is widely used in various industrial automation environments, involving water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, military, petrochemical, oil wells, electric power, ships, machine tools, etc., such as refrigeration systems, lubrication pump systems, air compressor etc.
-
Sealed airbrush compressor pressure switch
The working principle of the pressure switch is that if the pressure in the pressure switch system is higher or lower than the initial set safety pressure value, the internal disc of the pressure switch can detect and issue an alarm in time, and movement occurs, and the connection of the pressure switch is connected to the power supply , So that the connection of the pressure switch turns on or off the power.The water pressure switch is usually set to a fixed value when in use. That is, when the actual value is less than the fixed value or greater than the fixed value, an alarm will occur and movement will occur to cause a connection with another link. Turn the power on or off. When the water pressure in the system reaches a fixed value, it returns to its original state.
-
Ac Binary High/Low Pressure Switch For Air Conditioner With Refrigerant r134a. 410ar. 22.
PRESSURE VALUE High pressure: 3.14Mpa/2.65Mpa
Low pressure: 0.196Mpa (This value can be customized according to your requirements )
Thread size: 1/8 、 3/8 、7/16（Thread size can be customized according to your requirements ）
Inserting type: Two inserting pieces（ can be welded with the wire and has a sealing sleeve ）