Product name | 12/24/36v air ride bag tank pressure switch sealed for air compressor and train horn |
Applicable medium | Air, refrigerant, oil, water |
Pressure setting range | 0-50Mpa (The pressure parameter can be set according to the needs of your equipment and can be customized) |
Thread | Commonly used are G1/4 NPT1/4 G1/8 NPT1/8 or customized according to customer requirements |
Operating temperature | -30° C ~ 80° C |
Operating Voltage | 12V/24V |
Working current | 5A |
Terminals | 6.35 x 0.8mm,Can be equipped with different specifications of wiring, external waterproof cover can be added |
lifetime | 100,000 times |
This pressure switch is more versatile and has many common parameters. The following is a table of common parameters for your reference
ON(Turn-on value ) |
OFF(Cut-off value ) |
90psi |
120psi |
120psi |
150psi |
120psi |
145psi |
150psi |
180psi |
70psi |
100psi |
75psi |
105psi |
80psi |
110psi |
85psi |
105psi |
110psi |
140psi |
110psi |
150psi |
160psi |
180psi |
165psi |
200psi |
170psi |
200psi |
200psi |
170psi |
The selection of the product needs to be determined according to the pressure start-stop requirements of your equipment, working environment temperature, fluid medium and other factors, so before choosing a product, please communicate with our technicians about the specific parameters and choose the right product for you.
The various products provided by our company conform to the relevant national or international quality standards.The company is equipped with a number of professional and technical personnel. In order to ensure the accuracy and quality of the products, there will be special technology before production to guide and confirm specific products and parameters according to your product use place and working environment.During the production process, all products undergo multiple quality inspections before they leave the factory. Our company is responsible for replacing the products with quality problems within 12 months from the date of leaving the factory.
The pressure setting range of this switch is relatively flexible, and it has a wide range of applications. The most common ones are used in various small air pumps, car horns and air compressors.Usually there is a threaded interface, and the switch tail can be welded to the wire. The specification of the wire is according to your requirements, as shown in the figure below.
There is also a pagoda interface, as shown in the following figure.
If you need to add air pipes or oil pipes, and require wiring and terminals, you can choose another shape as follows.