The automobile air conditioner pressure switch is a part to protect the air conditioner refrigeration, it can adjust the pressure in time.When the refrigerant pressure in the air conditioning system is too high or too low, the pressure switch is turned off, so that the compressor does not work (the pressure switch and other switches control the relay to control the compressor) and protect the system components from damage.Generally divided into two-state pressure switch and three-state pressu...
The pressure switch is mainly used in the refrigeration system, in the pipeline circulation system of high pressure and low pressure, to protect the abnormal high pressure of the system to prevent damage to the compressor.
After being filled, the refrigerant flows into the aluminum shell (that is, inside the switch) through the small hole under the aluminum shell. The inner cavity uses a rectangular ring and a diaphragm to separate the refrigerant from the electrical part and seal it at t...
Ceramic pressure sensor module
Name: Voltage type ceramic pressure module
Supply voltage:5/5~16/5~36VDC
range:0~1…1.6…2…3…5…10…20…30MPA
output signal:0.5~4.5V
Response time:<2MS
Measuring medium
Compatible with ceramic water, gas or liquid
long term stability
≤±0.5%FS/year
Operating temperature
-40~125℃
Storage temperature
-40~130℃
Zero temperature coefficient
Typical: ±0.03%FS/℃; Maximum: ±0.05%FS/℃
Sensitivity temperature coeffic...
Ceramic pressure sensor module
Name: Voltage type ceramic pressure module
Supply voltage:5/5~16/5~36VDC
range:0~1…1.6…2…3…5…10…20…30MPA
output signal:0.5~4.5V
Response time:<2MS
Measuring medium
Compatible with ceramic water, gas or liquid
long term stability
≤±0.5%FS/year
Operating temperature
-40~125℃
Storage temperature
-40~130℃
Zero temperature coefficient
Typical: ±0.03%FS/℃; Maximum: ±0.05%FS/℃
Sensitivity temperature coeffic...
Switch
SPST (single pole single throw); SPDT (single pole double throw)
Exact point type
Normally closed or normally open
Mechanical life
1 million times
Rated current
DC/AC 5V/12V/24V/36V 1A 120V/250V 3A
Pressure parameters
Yk-023a7 inch Hg / 3 inch Hg vacuum range 0 ~ -0.1mpa; Yk-023n8 inch Hg / 4 inch Hg vacuum range 0 ~ -0.1mpa; Yk-023c7 inches of mercury / 4 inches of mercury use really! O range: 0 ~ 0.1MPa
Wireway
CRCC certified low smoke halogen-free conductor shall comply...
NAME
High And Low Pressure Pressure Switch/Two state pressure switch/Air conditioning refrigeration pressure switch/R134a pressure switch
MODEL
HFC-134a
PRESSURE VALUE
High pressure:3.14Mpa/2.65Mpa、Low pressure:0.196Mpa (This value can be customized according to your requirements )
Thread size
1/8 、 3/8 (Thread size can be customized according to your requirements )
Inserting type
Two inserting pieces( can be welded with the wire and has a sealing sleeve )
Scope of use
R1...
The automobile air conditioner pressure switch is a part to protect the air conditioner refrigeration, it can adjust the pressure in time.When the refrigerant pressure in the air conditioning system is too high or too low, the pressure switch is turned off, so that the compressor does not work (the pressure switch and other switches control the relay to control the compressor) and protect the system components from damage.Generally divided into two-state pressure switch and three-state pressu...
1.Working pressure range: -100kpa~10Mpa, Parameter setting: The start and stop value of the pressure switch can be set according to customer requirements. All parameters are set in the factory , and cannot be adjusted after leaving the factory. If you need to adjust, please select the adjustable pressure switc
2. Bursting pressure: 34.5Mpa
3. Ambient temperature: -30℃~+80℃
4. System medium temperature: -50℃~+120℃, Contact form: normally open, normally closed, single pole double throw, Elec...
The automobile air conditioner pressure switch is a part to protect the air conditioner refrigeration, it can adjust the pressure in time.When the refrigerant pressure in the air conditioning system is too high or too low, the pressure switch is turned off, so that the compressor does not work (the pressure switch and other switches control the relay to control the compressor) and protect the system components from damage.Generally divided into two-state pressure switch and three-state pressu...