Electrical parameters
5(2.5)A 125/250V
Pressure setting
20pa~5000pa
Applicable pressure
Positive or negative pressure
Contact resistance
≤50mΩ
Maximum breakage pressure
10kpa
Operating temperature
-20℃~85℃
Connection size
Diameter 6mm
Insulation resistance
500V-DC-lasted 1min,≥5MΩ
Control Method
Open and close method
Electric strength
500V—- lasted 1min, no abnormality
Installation method
Recommended for vertical installation
Applicable medium
Non-hazardous gas...
1.Working pressure range: -100kpa~10Mpa, Parameter setting: The start and stop value of the pressure switch can be set according to customer requirements. All parameters are set in the factory , and cannot be adjusted after leaving the factory. If you need to adjust, please select the adjustable pressure switc
2. Bursting pressure: 34.5Mpa
3. Ambient temperature: -30℃~+80℃
4. System medium temperature: -50℃~+120℃, Contact form: normally open, normally closed, single pole double throw, Elec...
The automobile air conditioner pressure switch is a part to protect the air conditioner refrigeration, it can adjust the pressure in time.When the refrigerant pressure in the air conditioning system is too high or too low, the pressure switch is turned off, so that the compressor does not work (the pressure switch and other switches control the relay to control the compressor) and protect the system components from damage.Generally divided into two-state pressure switch and three-state pressu...
1.Working pressure range: -100kpa~10Mpa, Parameter setting: The start and stop value of the pressure switch can be set according to customer requirements. All parameters are set in the factory , and cannot be adjusted after leaving the factory. If you need to adjust, please select the adjustable pressure switc
2. Bursting pressure: 34.5Mpa
3. Ambient temperature: -30℃~+80℃
4. System medium temperature: -50℃~+120℃, Contact form: normally open, normally closed, single pole double throw, Elec...
Protection level: IP65
Pressure range:-100kpa~10Mpa
Control form: normally open, normally closed
Electrical connection: wire type and insert type, this switch is wire type, it can also be made into insert type
Interface type: This switch is a quick-cut pagoda-shaped trachea or a threaded joint. The interface thread can be set according to the user’s installation requirements
Working voltage: 6-36VDC, 110-250VDC, high voltage resistance, high current products can be customized according ...
1.Product name: Refrigeration Pressure Switch, Air Compressor Pressure Switch, Steam Pressure Switch, Water Pump Pressure Switch
2. Use medium: refrigerant, gas, liquid, water, oil
3.Electrical parameters: 125V/250V AC 12A
4. Medium temperature: -10~120℃
5. Installation interface; 7/16-20, G1/4, G1/8, M12*1.25, φ6 copper tube, φ2.5mm capillary tube, or customized according to customer requirements
6. Working principle: The switch is normally closed. When the access pressure is greater than th...
1: A variety of appearances are available
2: Product parameters act according to user requirements
3: Easy to install, plug and play, convenient and quick
4: Responsive, timely on-off
The automobile air-conditioning pressure switch detects the pressure of the air-conditioning pipeline, and then transmits the pressure signal to the air-conditioning control system to protect the air-conditioning compressor and the pipeline! The air conditioner can work normally only whe...
1. Product name: China factory 12v /24v Barb Fitting normally open or normally closed pressure switch could be used for dewalt porter cable air compressor rated 105/135/90/120/150/180/160/200psi and other on off values .high quality through CE, ROSH certification.
2. Pressure control range: 0-10MPA 1MPA=145PSI=10bar.
3. Pressure value: 105-135psi , 90-120psi, 120-150psi, 160-200psi and so on. According to customer requirements.
4. Interface type: Barb connector, can be equipped with air pipe....