Measuring medium
Various liquids, gases or vapors compatible with 304 and 316 stainless steel
Measuring range
-100kpa…0~20kpa…100MPA (optional)
Safety overload
2 times full scale pressure
output signal
4~20mADC (two-wire system), 0~10mADC, 0~20mADC, 0~5VDC, 1~5VDC, 0.5-4.5V, 0~10VDC (three-wire system)
Power supply
8~32VDC
Medium temperature
-20℃~85℃
Operating temperature
-40-125℃
Relative humidity
0%~100%
Rise Time
90% FS can be reached in l...
Setting range of pressure value:-100kpa~10Mpa
Contact form: normally closed (H) normally open (L)
Contact capacity: AC250V/3A DC 3~48V, 3A
Contact resistance: ≤50mΩ.
Insulation resistance: ≥100MΩ between the terminal and the shell under DC500V.
Dielectric strength: AC1500V lasts 1min without breakdown
Compressive strength: 4.5Mpa10min without bursting.
Air tightness: 4.5Mpa1min without leakage.
Service life: 100,000 times.
Adaptation temperature: ambient temperature -30℃~+80℃, medium temper...
Name
Applicable medium
Air conditioning refrigeration medium, water, gas, oil, etc.
Pressure setting range
-100kpa~10Mpa In this range, the equipment in the factory is carried out according to customer requirements, and cannot be changed after leaving the factory.
Contact form
Normally open, normally closed, single pole double throw
Contact resistance
≤50MΩ
Medium temperature
High temperature resistant products can be customized
Working voltage, current
120/240VAC,...
Measuring medium
various liquid, gas or steam compatible with 304、316 stainless steel
Measuring range
-100kpa…0~20kpa…100MPA (optional)
Overload pressure
2 times full scale
output signal
4~20mA (two-wire system), 0-10VDC, 0-5VDC, 1-5VDC (three-wire system)
Supply voltage
8~32VDC
Operating temperature
-40-125℃
Temperature compensation
-10-70°C
Relative humidity
0%~100%
Rise Time
90% FS can be reached in less than 5 milliseconds
Accuracy...
Switch
SPST (single pole single throw); SPDT (single pole double throw)
Exact point type
Normally closed or normally open
Mechanical life
1 million times
Rated current
DC/AC 5V/12V/24V/36V 1A 120V/250V 3A
Pressure parameters
Yk-023a7 inch Hg / 3 inch Hg vacuum range 0 ~ -0.1mpa; Yk-023n8 inch Hg / 4 inch Hg vacuum range 0 ~ -0.1mpa; Yk-023c7 inches of mercury / 4 inches of mercury use really! O range: 0 ~ 0.1MPa
Wireway
CRCC certified low smoke halogen-free conductor shall comply...
The pressure switch is mainly used in the refrigeration system, in the pipeline circulation system of high pressure and low pressure, to protect the abnormal high pressure of the system to prevent damage to the compressor.
After being filled, the refrigerant flows into the aluminum shell (that is, inside the switch) through the small hole under the aluminum shell. The inner cavity uses a rectangular ring and a diaphragm to separate the refrigerant from the electrical part ...
1: Wide pressure control range:You can choose any on and off value (including negative pressure value) for the switch, and we will customize it for you.
2: Applicable medium: liquid, gas, refrigerant
3: Interface method: The interface of this pressure switch is a threaded interface,Commonly used thread specifications are G1/8, NPT1/8, G1/4, NPT1/4, M10*1, etc.The thread can be customized according to your requirements.In addition to this, there can also be small copper pipe interfaces, large...
Measuring medium
Various liquids, gases or vapors compatible with 304 and 316 stainless steel
Measuring range
-100kpa…0~20kpa…100MPA (optional)
Safety overload
2 times full scale pressure
output signal
4~20mADC (two-wire system), 0~10mADC, 0~20mADC, 0~5VDC, 1~5VDC, 0.5-4.5V, 0~10VDC (three-wire system)
Power supply
8~32VDC
Medium temperature
-20℃~85℃
Operating temperature
-40-125℃
Relative humidity
0%~100%
Rise Time
90% FS can be reached in l...
1.Electrical parameters: 0.2A 24V DC T150; 0.5A 1A 2.5A 250VAC
2.Operating temperature: -40℃~ 120℃(No frost )
3.Connection size: The normal size is 1/8 or 1/4. Can be customized according to customer requirements
4.lifetime: 1 million times
5.Electrical life : 0.2A 24V DC 1 million times; 0.5A 12V DC 500,000 times; 1A 125V/250VAC 300,000 times
Pressure setting range psi
Pressure division psi
Pressure division kpa
Setting error psi
0.3~1psi
1~7kpa
±0.2psi
1.0~5psi
7~35kpa
±0....
The pressure switch is mainly used in the refrigeration system, in the pipeline circulation system of high pressure and low pressure, to protect the abnormal high pressure of the system to prevent damage to the compressor.
After being filled, the refrigerant flows into the aluminum shell (that is, inside the switch) through the small hole under the aluminum shell. The inner cavity uses a rectangular ring and a diaphragm to separate the refrigerant from the electrical part ...